A system-on-module for the product you are building.

System-on-module based on Texas Instruments Sitara AM1808 processor with an ARM926EJ-S core running at 450 MHz. Review carrier-board, memory and interface requirements with us.

Processor

The AM1808 SoM-M1 supports the Texas Instruments Sitara AM1808 processor with an ARM926EJ-S core running at 450 MHz

Memory

Scalable serial NOR flash memory (16 MB standard); Mobile DDR SDRAM memory (64 or 128 MB); Boots from NOR flash

Form factor

System-on-module

System-on-module based on Texas Instruments Sitara AM3517 microprocessor with ARM Cortex-A8 RISC core running at 600 MHz. Review carrier-board, memory and interface requirements with us.

Processor

The AM3517 SOM-M2 supports the Texas Instruments Sitara AM3517 microprocessor with ARM Cortex-A8 RISC core running at 600 MHz

Memory

Scalable NAND flash memory (512 MB standard); Boots from onboard NAND or external SD/MMC, NAND, NOR, UART, USB, or Ethernet; 166 MHz DDR2 SDRAM, 256 MB standard (scalable to 512MB)

Form factor

System-on-module

System-on-module based on Texas Instruments DM3730 or AM3703 Applications Processor running up to 1 GHz. The SOM supports the following Texas Instruments processors: DaVinci DM3730 Sitara AM3703; IVA2.2 Subsystem TMS320C64x+™ DSP core running up to 800 MHz and supporting multiple codecs (DM3730 only); POWER SGX™ Graphics Accelerator (DM3730 only). Review carrier-board, memory and interface requirements with us.

Processor

Texas Instruments DM3730 or AM3703 Applications Processor running up to 1 GHz. The SOM supports the following Texas Instruments processors: DaVinci DM3730 Sitara AM3703; IVA2.2 Subsystem TMS320C64x+™ DSP core running up to 800 MHz and supporting multiple codecs (DM3730 only); POWER SGX™ Graphics Accelerator (DM3730 only)

Memory

NOR flash memory (16 MB standard); Mobile DDR SDRAM / NAND flash memory (PoP technology) 256 MB / 512 MB

Form factor

System-on-module

System-on-module based on NXP i.MX6 single-, dual-, or quad-core ARM® Cortex™-A9 processor running up to 1GHz (single) or 1.2 GHz (dual/quad). Review carrier-board, memory and interface requirements with us.

Processor

NXP i.MX6 single-, dual-, or quad-core ARM® Cortex™-A9 processor running up to 1GHz (single) or 1.2 GHz (dual/quad)

Memory

32-bit wide DDR3L-1066, 2 GB (dual/quad); NAND flash, 1 GB

Form factor

System-on-module

System-on-module based on Xilinx Zynq™ Z-7020 All Programmable SoC featuring dual-core ARM® Cortex™-A9 processing system running up to 766 MHz with Artix™-7 FPGA programmable logic fabric. Review carrier-board, memory and interface requirements with us.

Processor

Xilinx Zynq™ Z-7020 All Programmable SoC featuring dual-core ARM® Cortex™-A9 processing system running up to 766 MHz with Artix™-7 FPGA programmable logic fabric

Memory

32-bit wide LPDDR2-800 (512 MB); QPSI Flash (32MB)

Form factor

System-on-module

System-on-module based on following Texas Instruments processors: OMAP-L138 processor with dual core ARM926EJ-S and C6748 VLIW digital signal processor (DSP) running at 375 MHz ( link to Texas Instruments OMAP-L138 page ) TMS320C6748 VLIW DSP running at 375 MHz ( link to Texas Instruments TMS320C6748 page ). Review carrier-board, memory and interface requirements with us.

Processor

The OMAP-L138 SoM-M1 supports the following Texas Instruments processors: OMAP-L138 processor with dual core ARM926EJ-S and C6748 VLIW digital signal processor (DSP) running at 375 MHz ( link to Texas Instruments OMAP-L138 page ) TMS320C6748 VLIW DSP running at 375 MHz ( link to Texas Instruments TMS320C6748 page )

Memory

Scalable serial NOR flash memory (16 MB standard); Boots from NOR flash; Mobile DDR SDRAM memory, 64 or 128 MB

Form factor

System-on-module